Do you have a question about the Catalinbread Belle Epoch Tape Echo and is the answer not in the manual?
Discrete preamp for enhanced touch-sensitivity, works with 9-18V.
Replicates Echo Volume, controls dry to wet signal mix.
Sets input level, affects first repeat tone and volume.
Adjusts random tape wow and flutter effects in echoes.
Controls feedback for repeats, from single to self-oscillation.
Sets delay time, designed for real-time manipulation like EP-3.
Requires 9-18V DC Negative Ground power supply, minimum 70mA.
| Power Supply | 9V DC |
|---|---|
| Dimensions | 4.6" x 2.6" x 2.25" |
| Bypass | True Bypass |
| Input Impedance | 1 MΩ |
| Controls | Mix, Tone, Echo |
| Power Requirements | 9V DC, center-negative |
| Type | Tape Echo |
| Technology | Tape Echo Simulation |
| Current Draw | 100mA |
Loading...