CONTROLS
DLX: This is where you plug a 1/4” TRS
cable when connecting to the Belle
Epoch Deluxe. The other end of the TRS
cable goes into the expression output of
the Belle Epoch Deluxe.
TAP: This is where you plug a 1/4” TRS
cable when connecting to non-Belle
Epoch Deluxe pedals. They must be
pedals expecting a normally-open tap
tempo device (check your manual). The
CB Tap will not work with Boss pedals,
for example. Please also note that the
LED indicator will not illuminate when
using the CB Tap with non-Belle Epoch
Deluxe pedals.
To Previous Page
Loading...
