12. Maintenance, cleaning and disinfection
In case of problems during the maintenance of the Product, you should consult a specialist. The electric wheelchair should be checked by a specialist once
a year for its operational reliability.
Maintenance intervals
The functionality of the electric wheelchair must be checked before each use. The user must carry out the work shown in table 7 with the specified
intervals.
Table 7. Maintenance intervals of the Product units
Armrest height fixing screws are tightened
The remote controller is fixed and does not move in the holders
The armrest is not damaged
Wheels should rotate freely and without axial runout
Wheelchair moves in a straight line
Tire pressure corresponding to the recommended value
Remaining tire tread height not less than 1 mm
No visible damage to tires
The charge level is sufficient to move along the intended distance
The remote controller does not give errors at startup
All connectors are fixed and do not depart
Wheels rotate freely without beating
Seat cover and seat belts
Seat cover is not damaged
The belt has no visible defects
The seat belt buckle is locked and unlocked by pressing the button
Tracks are free from oil and dust
The chains are undamaged and free from dirt. Sagging of drive chains no more than 5 mm
To Next Page