Catler BL 8011 - Assembling and Operating Your Blender; Preparation Before First Use; Assembling the Blender

8
ASSEMBLING AND OPERATING YOUR BLENDER BL 8011
ASSEMBLING AND OPERATING YOUR BLENDER BL 8011
Before the  rst use
Before using your blender for the  rst
time, remove any packaging material and
promotional labels. Ensure the appliance
is switched o at the power outlet and the
power cord is unplugged.
Wash the lid, inner lid, blender jug in warm,
soapy water with a soft cloth. Rinse and
dry thoroughly. Do not place parts in the
dishwasher (with the exception of the
blender jug).
The blender jug may be washed in the
dishwasher. Ensure the lid has been removed
from the blender jug before placing into the
dishwasher. The motor base can be wiped
with a damp cloth. Dry thoroughly.
NOTE:
When using your blender for the  rst
time, you may notice an odour coming
from the motor. This is normal and will
dissipate with use.
Assembling your blender
Step 1
Place the motor base on a  at, dry surface
such as a bench top. Ensure that the motor
base is switched o at the power outlet and
the power cord is unplugged.
Step 2
With the blender jug in the upright position
place it onto the motor base. The handle of
the blender can be positioned to the left or
right hand side of the appliance.
Step 3
Add food or liquid into the blender jug
ensuring not to exceed the ‘MAX’ mark. Place
the blender lid  rmly into position on the
top of the blender jug. Insert the clear inner
lid into the blender lid and turn clockwise to
lock into position.
NOTE:
When adding oil or other liquids
during operation, remove the inner lid
turning anti-clockwise and lift up. Pour
ingredients through this hole. Insert the
inner lid back to its position.
WARNING:
THE BLENDING BLADES ARE EXTREMELY SHARP. AVOID ANY CONTACT WITH
FINGERS AND HANDS.