Need help?Do you have a question about the Catrike Pocket and is the answer not in the manual?
Locating and identifying the unique serial numbers permanently engraved on the frame.
Guidelines for safe riding, visibility, and helmet use on roads and trails.
Advice on handling pedal steer, brake steer, and general trike control for a smooth ride.
Routine checks, cleaning, lubrication, tire pressure, and strap adjustments for trike longevity.
Attaching brake rotors and ensuring correct tire and rotor rotation direction.
Mounting brake calipers and installing spindles with headsets into the head tubes.
Detailed breakdown of headset components and their correct assembly order.
Attaching front wheels to the spindle/steering arms using quick release mechanisms.
Adjusting handlebar position for rider comfort and steering control.
Connecting the tie rod to the spindle assemblies for steering linkage.
Aligning front wheels for optimal steering performance and tire wear.
Threading brake cables through levers, housing, and actuating arms.
Adjusting brake pads and calipers for proper rotor contact and free spinning.
Inserting and securing the boom into the main frame with a clamp.
Mounting front and rear derailleurs onto the frame and post.
Routing shifter cables through guides and to the derailleurs.
Attaching pedals, noting the reverse thread on the left pedal.
Laying and securing the seat mesh onto the Catrike frame.
Adjusting the boom length for rider comfort and proper leg extension.
Routing the chain through the drivetrain components and connecting it.
Adjusting front and rear derailleurs for smooth gear shifting.
Adjusting the angle of the seat back for rider preference.
Mounting the included left-side mirror onto the Catrike.
Attaching the flag mount and flag to the rear dropout.
Mounting the computer sensor bracket onto the spindle assembly.
Positioning and securing the neck rest for rider comfort.
Installing the secondary pulley assembly for Dumont models.
Installing the secondary pulley assembly for RoadAR models.
Assembling the shock absorber components.
Attaching the assembled shock to the Catrike frame.
Tuning sag and rebound damping for the rear shock absorber.
Installing Cellasto components for suspended spindles based on rider weight.
Initial assembly of the left spindle components.
Second stage of left spindle assembly, including shock absorber.
Final steps for left spindle assembly, focusing on brake mounting.
Initial assembly of the right spindle components.
Second stage of right spindle assembly, including shock absorber.
Final steps for spindle assembly, focusing on pre-compression.
Assembling the main folding hinge mechanism.
Installing the frame lock system to secure the folded trike.
Assembling the roller wheels used for stability when folded.
Mounting the assembled roller wheels onto the Catrike frame.
Assembling the kickstand components.
Installing the kickstand onto the Catrike frame.
Step-by-step guide on how to fold the Catrike for storage or transport.
Assembling the parking brake mechanism for the 700 model.
Assembling the rear derailleur and hanger components.
Installing the rear wheel using the thru-axle system.
Explains what the warranty does and does not cover, and liability limits.
Details on warranty service, repair, and replacement processes.
General| Frame Material | Aluminum |
|---|---|
| Foldable | No |
| Type | Recumbent Trike |
| Wheel Size | 20" (Rear) |
| Weight Limit | 275 lbs |
| Crankset | Shimano |
| Seat | Mesh seat |
To Next Page
