21
OPERATING YOUR WINE CELLAR
It is recommended you install the wine cellar in a place where the ambient temperature is between
19ºC-24ºC (66ºF-75ºF). If the ambient temperature is above or below recommended temperatures,
the performance of the unit may be affected. For example, placing your unit in extreme cold or hot
conditions may cause interior temperatures to fluctuate. The range of 7ºC-18ºC (45°F-65°F) may
not be reached.
Recommended temperature settings
Wine conservation: 10°C-14ºC (50°F-57ºF)
Rose and sparkling wines: 7°C-8ºC (45°F-46ºF)
Dry/white wines: 9°C-12ºC (48°F-53ºF)
Red wines: 14°C-18ºC (59°F-65ºF)
Setting the temperature control
You can select temperature display setting from Fahrenheit to Celsius degree by touching the
°F/°C button.
If you desire to change the temperature, set the temperature as you desire by touching button.
The temperature that you desire to set will increase 1ºF or 1ºC if you touch the button once.
NOTE: If the unit is unplugged, if the power is lost, or turned off, you must wait 3 to 5 minutes
before restarting the unit. If you attempt to restart before this time delay, the wine cellar will not
start.
When you use the wine cellar for the first time or restart the wine cellar after having been shut off
for a long time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activation time.
Once the wine cellar is running for a few hours everything will be back to normal.
Interior light
To turn the interior light ON or OFF, press the button. The light will be turned off automatically
if it remains ON for 10 minutes. To turn it on again, press the button again and the light will
turn back on.
Storage
Many bottles may differ in size and dimensions. As such the actual number of bottles you may be
able to store may vary. You can place 40 standard bottles in this wine cellar.
To Next Page
Loading...
