CAZON B26 - Introduction and Intended Use; Important Reminders

1.Introduction and Intended Use
This manual is for B26 models. It is a fully automatic digital blood pressure
measuring device for adults on the upper arm at home or doctor’s/nurse’s
office. It enables very fast and reliable measurement of systolic and
diastolic blood pressure as well as pulse through the oscillometric method.
Before using, please read this instruction manual carefully and then keep it
in a safe place. Please contact your doctor for further questions on the
subject of blood pressure and its measurement.
Warning：Not suitable for neonatal and infants.
Warning：Not suitable for pregnant people.
This device can not be used together with hf surgical equipment.
1.1 Remember…
• Only a health-care professional is qualified to interpret blood pressure
measurements.
• This device is NOT intended to replace regular medical checkups.
• It is recommended that your physician review your procedure for using
this device.
• Blood pressure readings obtained by this device should be verified
before prescribing or making adjustments to any medications used to
control hypertension. Under no circumstances should you alter the
dosages of any drugs prescribed by your doctor.
• This device is intended for being used by adults only. Consult with a
physician before using this device on a child.
•In cases of irregular heartbeat (Arrhythmia), measurements made with
this device should only be evaluated after consultation with your doctor.
• Familiarize yourself with the section titled "Important Information on
Blood Pressure and its Measurement". It contains important information
on the dynamics of blood pressure readings and will help you to obtain
the best results.
1. Introduction and Intended Use...........................................................
2. Important Information on Blood Pressure and its Measurement......
3. Components of Your Blood Pressure Monitor..................................
4. Using Your Monitor for the First Time..............................................
5. Measurement Procedure..................................................................
6. Care and Maintenance.....................................................................
7. Warranty..........................................................................................
8. Certifications....................................................................................
9. Technical Specifications..................................................................
10. EMC Declaration...........................................................................
3
6
8
10
11
19
20
20
20
22
CONTENTS