To Next Page

To Previous Page

250 Rebagger Auger Packer 2014

5 OF 10

6) Gear motors will get warm to the touch and should not cause concern for equipment

reliability and operation. A temperature rise is normal per new NEMA specifications.

7) If additional wire runs are added to any junction box or control panel, wiring practice

should be such as to maintain prevailing electrical hazard classification.

8) High-pressure air systems are dangerous. Do not service or troubleshoot systems with air

supply on. Be sure to bleed off any trapped air before working on components since it is

possible to have high pressures trapped in airlines and cylinders, etc.

9) Keep fingers, hands, feet, etc.; out of path of pneumatically operated components.

10) Safety glasses should be worn in equipment area.

11) Follow the safety regulations for your plant. Always use good judgment.

WITHIN THE TEXT OF THIS MANUAL:

"WARNING" indicates possible injury to personnel;

"CAUTION" indicates possible damage to equipment;

"NOTE" is an informational comment.

Questions and Answers:

Need help?

Do you have a question about the CBE 250 and is the answer not in the manual?

CBE 250 Specifications

General