Technicalinst. guide Limpido XC2 v4.0
1. Pack contents
• 1 electrolysis box Limpido XC2
• 1 electrolysis cell with built-in temperature sensor + 1 set of 2 union connections for 50mm
diameter tubes
• 1 flow detector fitted with a connector with a Ø50mm ¾" fixing collar + M/M ¾" nipple
• 1 stainless steel earthing collar with Ø50mm ½" fixing collar
• 1 analysis kit (chlorine, pH, hardness, salinity, stabiliser, etc.)
• 1 bag containing
– 1 staple for the cell connector
– 4 fixing screws and anchors for the power supply box
– 2 seals for the cell union connections
• Technical manual (this document)
www.c-
cei.fr
2
To Next Page
Loading...