8
To run a programme
• Sort out the clothes into groups of similar fabrics and colours.
Check the care label inside the garment. We suggest that a fabric
conditioner be used to reduce static electricity. Delicate articles e.g.
tights should be placed inside a pillowcase. It is better to dry small
and large articles together.
• Open the door.
• Load clothes loosely into the drum.
• Load sheets first starting with one corner.
• Close the door.
• Dry your hands.
• Switch on the machine.
• Select correct heat position.
• Set the programme to the required dryness setting.
• Press the start button.
The standard cotton programme is suitable to dry normal wet
cotton laundry. It is the most ecient programme in terms of energy
consumption for drying wet cotton laundry.
Your appliance is a reversing, small door opening. A full load will
typically take 135 minutes and will use approximately 4.39kWh of
electricity. A half load will typically take 75 minutes and will use
approximately 2.38 kWh of electricity.
The power consumption of the o-mode and the left-on mode is zero.
To Next Page
Loading...
Need help?
General
