13
Descalers
• Descalers can be added to the prewash and main wash
compartments as recommended by their manufacturers.
• Place the detergent in the compartments first, followed by
the descaler.
Selecting the Washing Programme
To switch on the appliance and select the programme, proceed as
follows:
1 Turn the “Programme Selector” knob in either direction.
This switches on the washer dryer.
2 Select the washing programme. The time left to the end
of the programme and the maximum recommended
weight for the selected programme alternate on the
display. The symbols on the display light up to identify
the information shown.
3 The default spin speed values are shown. The initial
settings can be modified using the button underneath
the sequence of spin speeds.
4 If spin speed “no spin” is set, the appliance does not
perform the final spin and the washing programme
ends with water still in the tank.
To Next Page
Loading...
