7
Before First Use
When your washer dryer has been correctly installed, we
recommend that you pre-clean the machine.
This is to check that the installation, the connections and the
drainage are all correct, and to thoroughly clean the inside of the
washer dryer before any wash programmes are run.
Prior to pre-cleaning you should ensure the transit bolts have
been removed.
• Select the Cotton 90ºC programme and add a normal dose
of detergent into the detergent dispenser.
• Press the Start/Pause button.
Preparing Garments for Washing
• Wash lightly soiled garments using a short programme.
• Use a programme without prewash for medium-soiled
garments.
• Wash heavily soiled garments using a long programme
with prewash.
• Wash white and coloured loads separately.
• We recommend that small garments are placed in a wash
bag.
• We recommend using the delicate programmes for
sensitive fabrics.
• Separate clothes according to their types (cotton, synthetic,
sensitive, woolen, etc.), required washing temperatures and
level of dirtiness.
• Since new coloured clothes may shed dye on the first
wash, wash them separately.
• Remove any metal pieces found on the items to be
washed, for example curtain hooks.
• Fasten all zips and buttons.
• Turn garments, such as knitted fabrics, inside out.
• Before placing the clothes in the drum, make sure all the
pockets are empty. Any small objects may block the drain
pump.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
