What to do if my CDA ci860 will not start?
If your CDA Washer/Dryer won't start, here are a few things to check: * Make sure the appliance is plugged into the socket. * Check the fuse and replace it if damaged. * Verify the power supply is working correctly. * Ensure the washer door is fully closed. * Press the “Start” button. * Make sure the “Programme selector” knob is set correctly.
Why is my CDA ci860 Washer/Dryer vibrating so much?
Excessive vibration in your CDA Washer/Dryer can be caused by several factors: 1. Ensure that all transit bolts have been removed. 2. Make sure the machine is on a level surface. 3. Avoid overloading the washer/dryer and ensure clothes are evenly distributed. 4. Confirm that the washer/dryer isn't touching any surrounding objects.
How to fix CDA ci860 that does not fill with water?
If your CDA Washer/Dryer isn't filling with water, consider these possible causes: * Ensure you've pressed the “Start” button. * Check that the water tap is turned on. * Verify adequate water pressure. * Inspect the inlet hose for kinks. * Confirm there is no water supply failure. * Ensure the “Programme selector” knob is correctly set. * Make sure the washer door is properly closed. * Unblock the inlet hose filter.
What to do if CDA ci860 is not draining water?
If your CDA Washer/Dryer isn't draining water, check the drain hose for obstructions or bends. Also, inspect and clean the pump filter.
Why does my CDA ci860 stop mid-cycle?
If your CDA Washer/Dryer stops before finishing its wash cycle, check both the power and water supplies to ensure they are functioning correctly.
Why is my CDA ci860 draining while filling?
If your CDA Washer/Dryer drains while it's filling, it could be due to the drain hose being too low. Ensure the drain hose is installed at the specified height and that the drain hose end is not immersed in water.
What causes excessive foam in my CDA Washer/Dryer?
Too much foam in your CDA Washer/Dryer can happen if you're using a detergent that's not low-foaming or if you're using too much detergent. Check if the detergent is suitable and reduce the amount you're using.
Why does operation of my CDA ci860 Washer/Dryer stop for a period of time?
If the operation of your CDA washer dryer stops for a period of time, check the display codes for an error message.
Why CDA Washer/Dryer fails to spin?
If your CDA Washer/Dryer fails to spin, it may be due to an unbalanced load. Try adding more clothes or running the spin cycle again.
Why does my laundry have detergent residues on it after washing in CDA ci860 Washer/Dryer?
If your laundry has detergent residues after washing in your CDA Washer/Dryer, it may be due to non-dissolving particles in the detergent. Perform an extra rinsing operation using the “Rinse” programme or brush the particles off the washing after it is dry.
How to select the appropriate wash programme using the programme selector knob and understanding the display.
Guide to selecting the desired drying level (e.g., for ironing, hanger drying, or folding).
Instructions for setting a specific drying time instead of a drying level.
Guidance on cleaning the pump filter to remove lint and foreign objects, preventing damage to the drain pump.
Instructions for levelling the appliance using adjustable feet to ensure stable and quiet operation.
Details on connecting the water inlet hose to the tap, including pressure requirements.
Guidance on connecting the drain hose to a suitable outlet, specifying height and length requirements.
General| Appliance placement | Freestanding |
|---|---|
| Loading type | Front-load |
| Colour of product | White |
| Built-in display | Yes |
| Washing capacity | 8 kg |
| Rinse Plus function | Yes |
| Adjustable drying level | Yes |
| Energy efficiency class (washing & drying) | A |
| Width | 60 cm |
| Height | 85 cm |
To Next Page
