17
Starting the Wash Programme
1 To start the washing programme (after making the
settings you want) press the “Start/Pause” button.
2 Once the cycle has started, the display shows the time
remaining before the end of the cycle and the
“Start/Pause” symbol on the display is constantly on.
3 During the washing/drying programme, the symbols
which identify the various phases light up:
Cycle phase symbols:
Prewash Wash Rinse Final Spin
Stopping or Changing the Programme
The washing programme in progress can be interrupted at any
stage:
1 Press the “Start/Pause” button for about 3 seconds: the
display shows the word “PAUS” (1 second) alternating
with the time remaining until the end of the cycle (for 1
second). The “Start/Pause” light flashes on and off.
2 Programmes can also be interrupted by turning the
programme/temperature setting knob while the cycle is
in progress.
To Next Page
Loading...
