KIT
9
10
fig. 1
fig. 2
1
2
3
4
5
6
7
8
9
10
Installation
This appliance must never be installed close to heat sources i.e. heating elements, radiators, cookers or in
damp places
The appliance should be mounted on a piece of wood (for example a section of worktop or kitchen carcass) if
a raised floor is to be fitted, if the kitchen floor is to be tiled after installation, or if the installation height of
the appliance is greater than 850 mm.
Contents and Tools Required
Fig. 1 - Installation kit contents
1. Wood screw (17 pcs)
2. Decor door fixing bracket
3. Decor door base fixings (2 pcs)
4. Decorative cover
5. Screw
6. Top bracket
Fig. 2 - Tools required
7. Spirit level
8. Spanner
9. Setsquare
10. Flathead screwdriver
To Next Page
Loading...
Need help?
General
