EasyManua.ls Logo

CDA FW482

CDA FW482
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : customer.care@cda.eu W : www.cda.eu
FW482 integrated in column
freezer
Manual for Installation, Use and Maintenance

Other manuals for CDA FW482

Question and Answer IconNeed help?

Do you have a question about the CDA FW482 and is the answer not in the manual?

CDA FW482 Specifications

General IconGeneral
BrandCDA
ModelFW482
CategoryFreezer
LanguageEnglish

Summary

FW482 Integrated Column Freezer Manual

Important Safety and Compliance

CE Declarations of Conformity

This appliance complies with EEC Directive 2006/95/EEC and EMC Directive 2004/108/EEC.

Environmental Responsibility

General Safety Precautions

Initial Setup and First Use

Freezer Usage Guidelines

Control Panel Operation

Thermostat Dial Settings

The thermostat dial can be set between 1 (least cold) and 5 (coldest) for temperature control.

Maintenance and Cleaning

Defrosting Procedures

Defrost regularly when ice is over 5mm thick. Avoid sharp objects and heaters.

Troubleshooting Guide

Appliance Not Working

Check power, fuses, socket, and room temperature (above 10°C).

Appliance Performance Issues

Verify load, thermostat setting, door seal, cooling system cleanliness, and ventilation.

Noisy Appliance Causes

Ensure appliance is level and stable; bubbling gas is normal.

Installation Instructions

Product Dimensions and Aperture

Details dimensions and required cabinet aperture for installation into standard larder units.

Decor Door Fitting

Step-by-step guide to fitting the decor door bracket, alignment, and securing the door.

Plinth and Ventilation Setup

Instructions for fitting the plinth, ensuring a 25mm gap and non-obstruction of ventilation slots.

Door Reversal Procedure

Electrical Safety and Connections

Fuse Replacement and Plug Connection

Guide to replacing the 13A fuse and connecting an alternative plug if necessary.

Wire Colour Coding

Instructions for connecting Green/Yellow, Blue, and Brown wires to the correct terminals.

Related product manuals