10
fig. 2
Installation
Product Dimensions and aperture
required for installation:
Your refrigerator is designed to be
installed into a standard larder unit
of width 560-570mm and depth of
550mm. the diagram below shows
the product dimensions and aperture
required.
Note also the arrows on the diagram
show ventilation requirements. In the
diagram a plinth vent is fitted to allow
free air into the cabinet. This is not
necessary where there is already a free
air supply into the run of units provided
by a vent in another unit (or side of the
run)
9
0
°
To Next Page
Loading...
Need help?
General
