7
Reversing the door
It is possible to reverse the door on this appliance, if required.
To do so, follow the steps below:
1. Loosen the top hinge fixing screws and remove the top hinge,
taking care to support the weight of the door.
2. Lift the door from the bottom hinge and place on a soft surface
to protect the door from damage.
3. Refit the hinge taken from the top to the opposite lower corner,
as in figure 3.
4. Replace the door and refit the hinge taken from the lower corner
to the opposite top corner.
5. Adjust the hinges to ensure the door is aligned correctly.
fig. 3
To Next Page
Loading...
Need help?
General
