20
Reversing the Doors
We recommend you seek the help of another individual to support the
doors whilst performing this operation.
1. Carefully prise o the cover cap for the top hinge and unscrew the
screws fixing the top hinge to the appliance, you should support the
upper door whilst doing this.
2. Carefully remove the upper door and place it somewhere safe. Note
that there are spacers between the door and the hinge; note how
many and their position.
3. Remove the central hinge by removing the 3 screws fixing it to the
appliance; support the lower door whilst doing this.
4. Remove the lower door and place it somewhere safe, again noting
the position of any spacer pieces.
5. Swap the bottom hinge to the opposite side.
6. Refit the lower door using any spacers and position the central hinge
on the door. After removing the 3 cover caps, fix the hinge securely to
the appliance.
7. The top hinge and replacement cover hinge covers are included in
the fittings pack. Refit the upper door and the new top hinge and fix it
securely to the appliance.
8. Fit the central cover caps and top hinge cover pieces in place to
complete the process.
Ensuring the door seals correctly:
It is normal for the seal to be compressed after the door has been
reversed.
With the door closed, use a hair dryer to expand the seal and fill the
To Next Page
Loading...
