CDA FW971 - Control Panel; Power Button; Fridge Thermostat & Super Cool

10
Control panel
A. Power button
To put the fridge freezer on standby press and hold the power button
for approximately three seconds. To start the compressor working
again, press and hold the power button for approximately three
seconds.
B. Fridge thermostat dial
The fridge temperature is regulated by this dial.
The thermostat can be set between fully anti-clockwise (super cool
function) and fully clockwise (least cold).
The super cool function can be used when introducing large
quantities of fresh food to maintain an optimal temperature in the
fridge section.
To switch on the super cool function, turn the fridge thermostat dial to
super cool.
Once the food is suciently chilled, turn the thermostat dial back to
the previous setting.
B
C
fig. 3
A
Mid
High
S.Cool
Low
REF . FRZ.
Mid
High
S.Cool
Low