16
• During operation, it is normal for the fan to run, even when the
compressor is not running.
The light does not work, check
• There is power to the appliance.
• The house fuses or circuit breakers are intact and the fuse in the
plug has not blown.
• The light button is not set to o.
Please note:
The LED lighting cannot be replaced without a service call. If the light
fails, contact CDA Customer Care.
The door will not close properly, check
• The appliance is level and stable.
• If the door has been removed, it may not have been correctly
refitted.
• The door seal is dirty.
• The shelves are not positioned correctly.
The display show “E1” or “E2”
• The temperature sensor has failed.
To Next Page
Loading...
