14
Removing the shelves
To remove a shelf from the wine cooler, first remove all bottles from
the shelf, then pull the shelf forwards until the groove on either side of
the shelf is level with the plastic peg on either side of the cabinet (as
shown in fig 4). Then lift the shelf up and pull forwards.
To replace the shelves, follow the steps above in reverse order.
Temperature alarm
If the temperature rises or falls outside the set temperature range, an
alarm will sound and the display will flash.
This may be because:
• The wine cooler has not yet reached the set temperature (when first
switched on).
• There has been a power failure.
• The wine cooler has been overloaded.
• The door is not closed properly.
To Next Page
Loading...