CDA FWV600

6
Use and Controls
FWV451 & FWV600
To switch the power on/o
• Press and hold the power button for one second to switch the wine
cooler on.
• Press and hold the power button for five seconds to switch the wine
cooler o.
To change the temperature
• Press the up or down buttons until the required temperature is
shown on the display.
• The preset temperature is 12˚C / 54˚F.
• To change the temperature display from Fahrenheit to Celsius,
or Celsius to Fahrenheit, press and hold the light button for five
seconds.
• To view the set temperature, touch the up or down button at any
time and the set temperature will flash in the LED display for five
seconds.
Key:
1 – Power button
2 – Light button
3 – Up button
4 – Down button
Fig. 1
3
4
1 2