CDA FWV600 User Manual

8
Use and Controls
FWV901
To switch the power on/o
• Press and hold the power button for one second to switch the wine
cooler on.
• Press and hold the power button for five seconds to switch the wine
cooler o.
To change the temperature
• Press the up or down buttons for the appropriate zone until the
required temperature is shown on the display.
• The preset temperature is 10°C / 50°F for upper zone and 16°C /
60°F for lower zone.
• To change the temperature display from Fahrenheit to Celsius,
or Celsius to Fahrenheit, press and hold the light button for five
seconds.
• To view the set temperature, touch the up or down button at any
time and the set temperature will flash in the LED display for five
seconds.
Key:
1 – Power button
2 – Upper Zone, up button
3 – Upper Zone, down
button
4 – Lower Zone, up button
5 – Lower Zone, down
button
6 – Light button
7 – Upper Zone
8 – Lower Zone
3
4
1 2
Fig. 2
5
6
7 8

CDA FWV600 Specifications

General

Brand	CDA
Model	FWV600
Category	Wine Cooler
Language	English