13
To cancel the beeper: touch the “Timer” display once.
To cancel the timer
• Touch the “Heating zone control” for the zone.
• Touch the “Timer” display to select the timer function.
• Use the slider to reduce the units of the time to zero.
• Touch the “Timer” display again to conrm the units setting.
• Use the slider to reduce the tens of units of the time to zero.
• Touch the “Timer” display again to conrm the tens of units setting.
• The timer is now cancelled.
Please note: Cancelling the timer will not switch o the zone. You
should switch o the zone manually if required.
Please note: The power level can be adjusted during the
countdown using the “Heating zone control” for the zone being
timed, followed by the slider.
Using the timer as a minute minder
• Ensure the ceramic hob is switched on.
• Touch the “Timer” display to select the timer function.
• Use the slider to select the units of the time required.
• Touch the “Timer” display again to conrm the units setting.
• Use the slider to select the tens of units of the time required.
• Touch the “Timer” display again to conrm the tens of units setting.
The time is confirmed, the “Timer” display stops flashing and the
timer starts counting down (The display only shows whole minutes).
• At the end of the set time the “Timer” ashes “00” and the hob
beeps.
To Next Page
Loading...
Need help?
General
