9
fig. 4
2. Drip tray
The metal drip tray can only be used
for toasting, browning and grilling.
The drip tray can be slid into its
location underneath the shelf to collect
the juices from grilling (figure 4).
To remove it, lift slightly and slide it
towards you.
To reinsert it, slide it back until it is
correctly seated.
3.Microwave drive spigot
The drive spigot is supplied loose, this
just needs to be inserted in the floor of
the microwave cavity, located over the
“D” shaped drive shaft.
To Next Page
Loading...
