Need help?Do you have a question about the CDVI BIOSYS 1 and is the answer not in the manual?
General| Brand | CDVI |
|---|---|
| Model | BIOSYS 1 |
| Category | Security System |
| Language | English |
Distance limits, cable types, and shielding for reader-controller connections.
Specifies indoor installation, weather protection, and operating temperature range.
Recommends varistor placement for overvoltage protection in the Reverse Lock system.
Lists ARD12 and BS60 as compatible 12VDC power sources for the controller.
Guide to configuring device parameters using DIP switches for various functions.
Setting the door opening duration via DIP switches (1-15 seconds).
Selecting Wiegand data formats (26, 30, 44 bits) using DIP switches.
Wiring and configuration for installing one BIOSYS reader.
Wiring and configuration for installing two BIOSYS readers.
Explanation of jumper settings (J1, P1) and function assignments (J2-J5).
Steps for the initial power-on and system readiness check.
Detailed steps for registering user fingerprints, including handling card assignments.
Standard operation of the fingerprint reader for access control.
Procedure for deleting a registered fingerprint from the system.
How to duplicate a master card for administrative access.
Steps to revoke or cancel a master card's authorization.
Instructions for performing a factory reset on the BIOSYS 1 unit.
Lists BS60 and ADC335 power supplies recommended for use with the product.
Provides contact details for CDVI offices worldwide.
To Next Page
