Need help?Do you have a question about the cec BD-2200 and is the answer not in the manual?
Lists essential tools needed for disassembling the unit.
Outlines essential preparation steps before starting disassembly.
Details the process of removing the sub-chassis from the main unit.
Explains how to remove the motor mounting plate.
Lists specific tools required for making adjustments.
Guides on adjusting the turntable's height and ensuring it is level.
Details the procedure for setting the correct stylus point height.
Instructions for replacing the tone arm assembly.
Procedure for replacing the motor unit.
Steps for replacing the cueing mechanism or lifter shaft.
Guides on diagnosing and fixing issues where the platter fails to rotate.
Troubleshooting steps for a turntable platter that continues to spin.
Solutions for problems related to the turntable platter's speed accuracy.
Addresses and resolves noise problems encountered with the turntable.
Steps to diagnose and fix the absence of audio output from the speakers.
How to resolve issues where the tone arm does not descend correctly.
General| Drive method | Belt drive |
|---|---|
| Motor | DC motor |
| Speeds | 33 1/3, 45rpm |
| Tonearm | Static balance type |
| Cartridge weight range | 4g |
| Platter | aluminum die-cast |
| Cartridge | Moving magnet type |
| Power Supply | 60Hz |
To Next Page
