To Next PageTo Next Page
Need help?Do you have a question about the Cecilware FE-100G and is the answer not in the manual?
Critical warnings regarding flammable materials near the appliance and improper installation.
Comprehensive safety rules, including actions for gas leaks and general operational guidelines.
Instructions for unpacking the unit and details on its electrical connection and power needs.
Essential steps and compliance checks required before the coffee urn installation begins.
Guidance on ventilation, clearances, and proper gas/water connections for the unit.
Procedure for lighting the pilot, adjusting the thermostat, and understanding temperature dial settings.
Detailed list of parts for the FE-100G model's gas system with corresponding part numbers.
Comprehensive parts list for the ME-10G and ME-15G models, including part numbers.
Recommended methods for brewing coffee, including grind, water temperature, and brew time.
Instructions for operating the timer for water volume and adjusting the spray arm by-pass.
Routine cleaning advice for components and guidance on seeking external service assistance.
Cautions and initial troubleshooting steps specifically for trained service technicians.
Step-by-step instructions for replacing the solenoid valve and float switch.
Procedure for cleaning the float container and troubleshooting water refill overflows and spray head issues.
Detailed steps for removing and replacing the water pump assembly.
Troubleshooting the solid-state timer and understanding the agitator pump operation and maintenance.
Instructions for cleaning burners and adjusting the safety pilot flame.
General| Manufacturer | Cecilware |
|---|---|
| Model | FE-100G |
| Category | Coffee Maker |
| Type | Commercial |
| Brewing Capacity | 100 cups |
| Power | 1200W |
| Dimensions | 15.5 x 15.5 x 24.5 inches |
| Weight | 30 lbs |
| Material | Stainless Steel |
| Heat Source | Electric |
| Voltage | 120V |
| Water Tank | Removable |
