EasyManua.ls Logo

cecotec BAKE&FRY 2500 TOUCH - Technical Specifications

cecotec BAKE&FRY 2500 TOUCH
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BAKE&FRY 2500 TOUCH/WHITE
46
ENGLISH
The ingredients cooked with
the oven are not done
Too much food in the oven at
once.
Reduce the amount of food in
the oven when cooking.
Setting temperature too low
or time too short.
Set the temperature higher or
time longer.
Choose the incorrect function. Make sure you cook with the
proper function.
 Ingredients are stacked or
close to each other during
cooking.
Make sure food and
ingredients are spread out
evenly.

or oven rack position is not
adjusted.
Insert the desired tray into
the proper position. Take
caution as these components
may be hot.

air-frying
Ingredients with high content
of water.
Spraying or brushing a small
amount of oil on food evenly
can increase crispiness.
Display shows Error Code "E1" There is a short circuit in the
temperature monitor.
Remove the power cord from
the power outlet. Contact

Service of Cecotec.
Display shows Error Code "E2" The temperature monitor or
heaters is inoperative
Remove the power cord from
the power outlet, reconnect
and operate again. If it cannot
be solved, then contact the
Technical Support Service of
Cecotec.
6. TECHNICAL SPECIFICATIONS

Power: 1800 W

Volume: 25L



Time range: 1 min.-12 hrs. Time increases and decreases by 1 minute.

Related product manuals