them with the cleaning brush provided.
- Attachments are waterproof; therefore, they can be
washed with water if necessary. Dry them thoroughly
before storing or using them again.
- Clean the shaver and the attachments with the cleaning
brush after each use. Remove the attachment and rinse it
under warm running water. Do not use hot water.
- Warning: Do not rinse the laminated shaving head, as it is
permanently lubricated.
Oiling the blades
- Rinsing attachments under water (above) requires
lubricating the cutting blades once per month. Using only light-
grade oils
(e.g., sewing machine oil), simply spread 1-2 drops over the
blades with the fingertip carefully. Wipe away all excess.
- Use only light-grade oils, as these will not evaporate.
- Do not use hair oil, grease, or any oil mixed with kerosene
nor solvent, as these will evaporate and slow down the
speed of the blades.
5. TECHNICAL SPECIFICATIONS
Model: Bamba PrecisionCare 5in1 Product
reference: 04741
Charger: Input: 100-240 V~, 50/60 Hz, 0.2 A
Output: 5 V~, 1000 mA
BAMBA PRECISIONCARE 5IN1
53
ENGLISH
To Next Page
Loading...
