Efficiency at low load (10%) -- %
Declared by the manufacturer ba
sed on
the value calculated at load condition 5.
External power supplies with a
nameplate output power of 10 W or less
shall be exempted from this requirement.
In cases where multiple average active
efficiencies are declared for multiple
output voltages available at load
condition 1, the value published shall
be the value declared for the lowest
output voltage.
No-load power consumption
0.04 (for 115V, 60
Hz); 0.07 (for 230V,
50 Hz)
W
Declared by the manufacturer
based on the value measured for
load condition 6.
BAMBA PRECISIONCARE 5IN1
60
ENGLISH
To Next Page
Loading...
