BELLECOUTURE 21500
79
ENGLISH
builds up
presser foot before starting to sew.
Draw both threads back under the presser foot about 6
inches (10 cm) and hold until a few stitches are formed.
thread breaks
Check the threading of the sewing machine.
Reduce the top thread tension.
Replace the needle.
fabric.
Choose a suitable needle.
thread breaks
Remove lint.
puckers
Adjust the thread tension.
Shorten the stitch length.
Do not attempt to repair the sewing machine yourself. If the problem persists after
performing the checks described above, please contact authorised personnel, the
7. TECHNICAL SPECIFICATIONS
8. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/
Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances
and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
9. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms,
conditions, and deadlines established by the applicable regulations.
10. COPYRIGHT
publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic,