cecotec BIGDRY 10000 EXPERT CONNECTED - Dehumidifying Function Failure; No Air Output; Unusual Operation Noises; Error Code E1 Display

BIGDRY 10000 EXPERT CONNECTED62
ENGLISH
The dehumidifying
function does not
work
Is the lter clogged?
Clean the lter grille according to
the cleaning instructions of the
dehumidier.
Is the intake duct or discharge
duct obstructed?
Remove the obstruction from the
discharge duct or intake duct.
Air does not come out Is the lter clogged?
Clean the lter grille as described
in the section “Cleaning and
maintenance.”
The appliance makes
strange noises during
operation
Is the device tilted?
Place the device on a at and
stable surface.
Is the lter clogged?
Clean the lter grille as described
in the section “Cleaning and
maintenance.”
Display shows the
error code “E1”
There has been an error
or short-circuit in the
temperature or humidity
sensor.
Temperature sensor error
Contact the Technical Support
Service.
1. Service information
1.1 Area verication
Before starting work on systems containing ammable refrigerants, safety checks are
necessary to ensure that the risk of ignition is minimised. Before repairing the cooling system,
the following precautions must be observed:
1.2. Work procedure
The work must be carried out in accordance with a controlled procedure to minimise the risk
of a ammable vapour or gas being present while the work is being carried out.