EasyManuals Logo

cecotec BigDry 2000 Essential User Manual

cecotec BigDry 2000 Essential
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
ENGLISH
34
BIGDRY 2000 ESSENTIAL
3. BEFORE USE
Take the product out of the box and remove all packaging material.
Make sure all parts and components are included and in good conditions. If any
visible signs of damage are observed, contact the Technical Support Service
immediately.
Always keep the dehumidifier in an upright position to avoid leakages.
When installing the device, ensure a minimum safety distance of 30 cm to each
of its sides.
4. OPERATION
1. Connect the power adapter to the dehumidifier and then plug it into a power socket.
2. Press the on/off button (1) to turn the unit on, the power indicator will light up blue.
3. Press the on/off (1) button again to switch the device off, the power indicator should turn
off.
Draining collected water
1. The water tank in this unit has a maximum capacity of 700 ml, with a 300 ml per day
working capacity.
2. The power indicator (2) will turn yellow once the water tank is full and the unit will
automatically turn off.
3. Disconnect the power cable from the unit.
4. When the water tank is full, avoid tilting it, carefully pull it out and drain the water through
the water outlet.
5. Insert the water tank back into the unit and press the on/off button (1) to resume
operation.
The dehumidifier
is working
The water tank
is full

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the cecotec BigDry 2000 Essential and is the answer not in the manual?

cecotec BigDry 2000 Essential Specifications

General IconGeneral
Brandcecotec
ModelBigDry 2000 Essential
CategoryDehumidifier
LanguageEnglish

Related product manuals