6
BIGDRY 5000 ADVANCE
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the wall outlet is
grounded.
Check the power cord regularly for visible damage. If the cord is
damaged, it must be replaced by the ofcial Technical Support
Service of Cecotec, in order to avoid any type of danger.
To avoid electric shocks, do not clean with or allow to get inside
the product: water, liquid or any ammable substance.
Do not immerse the cord, plug, or any non-removable part
of the appliance in water or any other liquid, nor expose the
electrical connections to water. Make sure your hands are dry
before handling the plug or switching on the appliance.
Switch off the device immediately in the event of defects or
malfunctions.
Do not use the device if its cord or any other part is damaged.
In this case, contact the ofcial Technical Support Service of
Cecotec.
Do not spray insecticide, perfume or other ammable
substances around the product. Do not operate the device with
products with odours.
Do not install the device near to heat-generating appliances or
ammable and dangerous materials.
This product does not replace normal ventilation products.
Make sure the product is used and kept in well-ventilated
areas.
During operation, leave at least a 30-cm space on the back and
sides of the product.
The device must be placed so that the plug is accessible.
The appliance shall be installed in accordance with local
To Next Page
Loading...
