cecotec BIGDRY 8000 EXPERT CONNECTED User Manual

BIGDRY 10000 EXPERT CONNECTED62
ENGLISH
The dehumidifying
function does not
work
Is the lter clogged?
Clean the lter grille according to
the cleaning instructions of the
dehumidier.
Is the intake duct or discharge
duct obstructed?
Remove the obstruction from the
discharge duct or intake duct.
Air does not come out Is the lter clogged?
Clean the lter grille as described
in the section “Cleaning and
maintenance.”
The appliance makes
strange noises during
operation
Is the device tilted?
Place the device on a at and
stable surface.
Is the lter clogged?
Clean the lter grille as described
in the section “Cleaning and
maintenance.”
Display shows the
error code “E1”
There has been an error
or short-circuit in the
temperature or humidity
sensor.
Temperature sensor error
Contact the Technical Support
Service.
1. Service information
1.1 Area verication
Before starting work on systems containing ammable refrigerants, safety checks are
necessary to ensure that the risk of ignition is minimised. Before repairing the cooling system,
the following precautions must be observed:
1.2. Work procedure
The work must be carried out in accordance with a controlled procedure to minimise the risk
of a ammable vapour or gas being present while the work is being carried out.

cecotec BIGDRY 8000 EXPERT CONNECTED Specifications

General

Brand	cecotec
Model	BIGDRY 8000 EXPERT CONNECTED
Category	Dehumidifier
Language	English