cecotec BIGDRY 8000 EXPERT CONNECTED User Manual

BIGDRY 10000 EXPERT CONNECTED 9
electrical connections to water. Make sure your hands are
dry before handling the plug or switching on the device.
- The appliance must be installed, operated, and stored in a
room with a oor area larger than 4 m
2
.
- Switch o the appliance immediately in the event of defects
or malfunctions.
- Do not use the appliance if the cable or any other part is
damaged. In this case, contact the ocial Cecotec Technical
Support Service.
- Do not use insecticides, perfumes, or other ammable
substances near the appliance. Do not operate the appliance
with odour-producing products.
- Do not install the appliance near heat-generating appliances
or ammable and dangerous materials.
- This appliance cannot replace normal ventilation appliances.
- Make sure the appliance is kept and stored in well-
ventilated areas.
- During operation, leave at least 20 cm of free space on the
back and sides of the appliance.
- Install the drain piping at a grade that allows condensed
water to be drained continuously.
- The appliance must be placed so that the plug is accessible.
- The appliance must be installed in accordance with local
national wire and gas regulations.
- Operate the appliance in places with a temperature range
between 5 ºC and 35 ºC. Operating it outside of this range
could cause the appliance not to operate properly.
- Ensure the lter and cover of the appliance are properly
installed before operation.
- Do not sit or stand on the appliance.
- Make sure the tank of the appliance is emptied after each
use to ensure proper operation.

cecotec BIGDRY 8000 EXPERT CONNECTED Specifications

General

Brand	cecotec
Model	BIGDRY 8000 EXPERT CONNECTED
Category	Dehumidifier
Language	English