cecotec BigDry 9000 Professional - Troubleshooting

BIGDRY 9000 PROFESSIONAL / PROFESSIONAL BLACKBIGDRY 9000 PROFESSIONAL / PROFESSIONAL BLACK
23
ENGLISH
6. TROUBLESHOOTING
Problem Possible cause Solution
The unit does not work
Has the power cord been
disconnected?
Plug the power cord into the
outlet.
Is the tank full indicator
on? (The tank is full or not
installed properly)
Empty the water in the tank and
then reinstall the tank.
Is the temperature of the
room above 35 º or below
5 º?
The protection device is activated
and the unit cannot operate.
The dehumidifying
function does not work
Is the filter clogged?
Clean the filter as described in
this manual.
Is the intake duct
or discharge duct
obstructed?
Remove the obstruction from the
discharge duct or intake duct.
05608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 2305608_05609_BigDry 9000 Professional / Professional Black_Manual_YV01200129.indd 23 29/1/20 18:1429/1/20 18:14