cecotec BONGO D20 XL CONNECTED - Cleaning and Maintenance

BONGO D20 XL CONNECTED
67
ENGLISH
2. P1 - Total trip distance measurement (ODO) or current trip (TRIP).
5.4 Wheel use
- For a correct operation of the electric scooter, you should check and ensure the correct
pressure on the wheels before every use.
- The optimum pressure for these wheels is de 35 PSI / 2.5 bars / 250 kPa.
- We recommend you carry out periodic checks to ensure the pressure is within the

- During the shelf life of the wheels, we recommend using heat-sealing gels to prevent

5.5 Pairing

        
your appliance:
6. CLEANING AND MAINTENANCE
- Make sure the device is not plugged to the power supply or switched on before cleaning
or maintenance.
- 
-     
scooter.
- 
damage the electronic parts permanently.
- Never use pressurised water to clean the electric scooter.
- Do not try to repair the electric scooter on your own. Should it not work correctly or be

- Self-tapping nuts and other fasteners may loosen their hold and need to be retightened.
Brake disc

easily with the Allen key provided. Brake pads are consumable parts and must be replaced
