ENGLISH ENGLISH
32 33
SCOOTER ASSEMBLY:
1. Fix the scooter stem and lock the folding
tab. Then, lower the fixing ring and ensure
the tab is safely fixed.
2. Install the handlebar on the stem.
3. Use the hexagonal wrench in the tool kit to
tighten the 4 bolts.
ADJUSTING BRAKES:
The brakes require periodic adjustment.
1. The brake must be at a 5 or 6-mm distance from the handlebar grip.
2. Place yourself on the vehicle to verify the distance between the handlebar grip and the
brake.
3. If you feel the brake is too tight or loose, use the M4 hexagonal wrench to adjust it.
4. If it is too tight, shorten the brake line upward. If it is too loose, pull the brake cord down.
After adjusting it, tighten the nut.
Brake cable
4. Turn the scooter on and test it carefully
before riding it.
To Next Page
Loading...
