BREAD&CO 1000 DELICIOUS
24. Start/Pause/Stop
Display
1. Preset
2. Stir
3. Rest
4. Ferment
5. Heat
6. Bake
7. Keep warm
8. Complete
9. Light
10. Medium
11. Dark
12. Fruit
2. BEFORE USE
Take the product out of the box.
Remove all packaging materials, rating labels and transport protectors before plugging the
device. Keep the original box.
Make sure all parts and components are included and in good conditions. If any visible signs of
damage are observed, contact Cecotec’s Technical Support Service immediately.
Clean the device according to the “Cleaning and maintenance” section.
Wash and dry the bread container and the kneading blade before the rst use.
Set the bread maker mode and bake empty for 10 minutes. Then, allow it to cool down and
clean the inside again.
Dry all parts thoroughly and assemble them again. The appliance is ready for use.
Note: The appliance may emit a little smoke and/or odour when turned for the rst time. This is
normal and will disappear after the rst or second use. Make sure the appliance has sufcient
ventilation.
3. OPERATION
Note: Do not use metal utensils, they may damage the non-stick surface.
Plug the device into a power supply.
The device will beep and “3.00” will be displayed. The colon between the digits will remain
To Next Page
Loading...
