cecotec BREAD&CO 1000 DELICIOUS - Troubleshooting

BREAD&CO 1000 DELICIOUS
5. TROUBLESHOOTING
No. Problem Cuase Solution
1 Odour or burning smell
Flour or other ingredients
have spilled into the baking
chamber.
Stop the bread maker and
allow to cool completely.
Wipe excess our etc., from
the baking chamber with a
paper towel.
2
Ingredients not
blending, can hear
motor burning
Bread container or kneading
blade may not be installed
properly. Too many
ingredients.
Make sure kneading blade
is set all the way on shaft.
Measure ingredients
accurately.
3 "HHH" displays when
Start/Stop button is
pressed
Internal temperature of bread
maker is too high.
Allow unit to cool down
between programs.
Unplug unit, open lid, and
remove bread container.
Allow to cool 15-30 minutes
before starting new
programs.
4
Window is cloudy
or covered with
condensation
May occur during mixing or
rising programs.
Condensation usually
disappears during baking
programs. Clean window well
in between uses.
5
Kneading blade comes
out with the bread.
Thicker crust with dark crust
setting.
It is not uncommon for the
kneading blade to come out
with the bread. Once the
bread cools, remove the blade
with a spatula.