cecotec BREEZECARE 3000 User Manual

BREEZECARE 3000BREEZECARE 3000
3938
ENGLISH ENGLISH
Water shortage
indicator is on
No water in the tank.
Rell the water tank and wait at
least 1 minute.
Water level is low.
The water level required
has not yet reached the
vaporisation compartment.
Wait at least 1 minute.
The water tank isn’t well
positioned.
Check the positioning of tank on
the base.
The humidier isn’t on a at
surface.
Check the positioning of the
humidier.
The % RH of the room is over
90 %.
Wait until the % RH gets lower.
Humidier produces
an unusual smell
Humidier is new.
Take out water tank, open cover, let
it stay 12 hours in cool position.
Dirty water or water sitting
too long.
Clean water tank, ll with clear
water.
Residual smell from diusing
aroma oil on the aroma
cotton.
Remove the aroma cotton, rinse it
under clean water and allow it to
dry.
Humidier makes
a loud or unusual
sound
Resonant in water tank when
water is too low.
Fill water into water tank.
Humidier is on an unstable
surface.
Move the humidier to a stable at
surface.
Water tank is positioned
incorrectly.
Turn o and unplug the humidier,
then align the water tank cover
with its respective opening in the
inner chamber.
Humidier is malfunctioning.
Stop using the device immediately
and contact the Technical Support
Service of Cecotec.
The humidication
capacity is too low
There is natural or articial
air replacement in the room
which interfere the increase
of %RH.
Check if doors and windows are
closed.
Check if there is no air conditioning
working in the room.
The air inlet grids and nozzle
could be blocked.
Remove any blocking items from
the grids and the nozzle.
Too much scale in the water
basin.
Clean transducer.
The humidity selected rate is
too low.
Increase mist output speed.
Increase humidity setting rate.
Water is too dirty or water
kept too long in the tank.
Clean water tank, change to fresh
clear water.
The ambient
humidity is too high
Humidier is working in
Continuous mode.
Change the mode.
The humidity target is too
high.
Select a lower %RH target.
Room is not well-ventilated
Open a window to ensure proper
air ow for the humidier or move
the humidier to a better ventilated
room.
Excess water tank has spilled
while lling the water tank or
replacing the water tank back
onto the base.
Wipe o excess water from the
top and bottom of the base before
replacing the water tank.
There is
condensation in the
room
The room temperature is too
low.
Heat the room up.
The mist suddenly
stops coming out
Programmed timer period
has run out.
Turn humidier on.
The water shortage indicator
is on.
Rell water tank.
The target humidity level is
reached.

cecotec BREEZECARE 3000 Specifications

General

Brand	cecotec
Model	BREEZECARE 3000
Category	Humidifier
Language	English