cecotec CECOFRY ESSENTIAL RAPID SUNTOUCH - Cleaning and Maintenance; Troubleshooting

CECOFRY ESSENTIAL RAPID SUNTOUCH
ESSENTIAL RAPID MOONTOUCH
46
ENGLISH
frying while the device is still cold.
Tips
- Smaller ingredients require shorter preparation time than the larger ones.
- A larger amount of ingredients only requires a slightly longer preparation time, and a
smaller amount of ingredients only requires a slightly shorter preparation time.
- Sautéing small ingredients during the frying process optimises the result and can help
preventing unevenly fried ingredients.
- Add some oil to the fresh potatoes for a crispier result.
- Do not use the device to fry greasy food (such as sausages).
- Food that can be cooked in an oven can also be cooked with the device.
- The optimal amount for preparing crispy fries is 300 grams.
- Pre-made dough requires a shorter preparation time than home-made dough.
- You can also use the device to re-heat ingredients. To do so, set the temperature to 150 ºC
for 10 minutes.
4. CLEANING AND MAINTENANCE
Cleaning
- Clean the device after every use.
- Disconnect the appliance from the power supply and allow it to cool down before cleaning.
- Do not use metallic tools or abrasive products to clean the basket and grill.
- Use a soft, damp cloth to clean the device’s surface.
- Do not immerse the appliance in water or other liquid.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Note: Remove the basket to let the device to cool down more quickly.
- Clean the device thoroughly with hot water, washing-up liquid and a non-abrasive sponge.
- We recommend the use of a degreasing liquid to remove any remaining dirt.
- If dirt is stuck inside the basket and grill, we recommend lling the basket with hot water
mixed with washing-up liquid, and then letting the basket and grill dry for approximately
10 minutes.
- Clean the inside of the device with hot water and a non-abrasive sponge.
- Clean the heating element with a soft cleaning brush to remove any food residue. Be
careful not to damage the heating element.
Storage
- Unplug the device and let it cool down.
- Make sure all its parts are clean and dry when you store it.
- Place the cord into the cord-storing compartment and xing it inside the cord-xing slot.