Do you have a question about the cecotec Conga 5490 Cyclone and is the answer not in the manual?
Brand | cecotec |
---|---|
Model | Conga 5490 Cyclone |
Category | Vacuum Cleaner |
Language | English |
Lists robot components and sensors.
Details components of the Wet & Dry tank.
Describes the dust compartment, tank, and filters.
Identifies parts of the charging base.
Details the mop bracket and cloth.
Instructions for setting up the robot and charging base.
Guides for installing the wet/dry and dust tanks.
Steps for the initial cleaning cycle and mapping.
Explains the functions of the robot's physical buttons.
Details the remote control, pairing, and functions.
Adjusting suction power, setting current time, and scheduling tasks.
How to use the automatic cleaning mode.
How to use Edge mode via the mobile app.
How to use Spiral mode via the mobile app.
How to use Scrubbing mode via the mobile app.
How to use Manual mode via the mobile app.
How to use Back home mode via the mobile app.
How to use Smart Area mode via the mobile app.
How to use Spot mode via the mobile app.
How to use Restricted Area mode via the mobile app.
How to use Twice mode via the mobile app.
Steps to download, configure the app, and connect to Wi-Fi.
How to clean and maintain the main brush.
How to clean the silicone brush.
How to clean the Jalisco brush.
Instructions for emptying and cleaning the dust tank.
How to clean the Wet & dry tank.
How to clean and replace the high-efficiency filter.
How to clean and replace side brushes.
How to clean the free-fall sensors.
Robot fails to start or clean.
Robot fails to charge or return to the base.
Robot malfunctions or operates incorrectly.
Robot makes unusual noises during operation.
Cleaning is inefficient or dust escapes.
Issues with Wi-Fi connectivity.
Scheduled cleaning tasks are not performed.
Robot fails to return to base after specific cleaning.
Robot fails to resume cleaning after interruption.
Robot remains disconnected from the network.
Failure in mobile app to robot connection.