What to do if cecotec CONGA 1590 Vacuum Cleaner has Wi-Fi connection failure?
If you are experiencing Wi-Fi connection failure with your Cecotec Vacuum Cleaner, check your Wi-Fi connection and try connecting again.
What to do if cecotec CONGA 1590 has low battery?
If your Cecotec Vacuum Cleaner indicates a low battery, charge the robot.
What to do if Cecotec Vacuum Cleaner reports a left wheel error?
If you encounter a left wheel error with your Cecotec Vacuum Cleaner, check if the wheel or brush is entangled or blocked, and then clean it.
What to do if cecotec CONGA 1590 shows left side anti-collision sensor error?
If your Cecotec Vacuum Cleaner displays a left side anti-collision sensor error, clean or unblock the front bumper.
What to do if Cecotec Vacuum Cleaner reports left side free-fall sensor error?
If your Cecotec Vacuum Cleaner shows a left side free-fall sensor error, place the robot on a flat, stable surface.
General| Battery Capacity | 2600 mAh |
|---|---|
| Filters | HEPA filter |
| Type | Robot Vacuum |
| Control | App |
| Cleaning Modes | Auto, Edge |
| Voice Control | Yes (Amazon Alexa, Google Assistant) |
| Filter Type | HEPA |
| Programmable | Yes |
Adhere to manual, Cecotec not liable for misuse, ensure electrical safety, and proper placement.
Avoid hazardous placements, extreme temperatures, high surfaces, and use only supplied components.
Clear floor of objects like clothing, papers, and cords before operation.
Appliance not for children under 8; supervised use for children over 8; supervise children playing with it.
Handle Li-ion battery safely, dispose locally, charge new/stored batteries fully.
Lists main body, charging base, battery charger, remote control, brushes, tanks, filters, mop, etc.
Details dust tank, wet & dry tank, buttons, sensors, wheels, brush cover, battery cover.
Primary filter, high-efficiency filter, release buttons, covers, separator.
Install main brush, mop, and tanks (dust, wet & dry, mix) following instructions.
Download app, create account, add robot, connect to Wi-Fi, and troubleshoot issues.
Details the touch display, on/off button functions, and status indicator lights.
Covers starting auto cleaning, entering standby/config modes, and stopping operation.
Place base against wall, remove obstacles, connect power adapter to robot and supply.
Robot automatically returns to charging base when battery is low or cleaning is complete.
Charge fully for first use and after storage; charge when low.
Covers robot states like standby, sleep, and active operation.
Adjust water intensity for scrubbing and configure cleaning timers.
Select suction power and manually navigate the robot using direction buttons.
Enter schedule mode, set day of the week and time for cleaning.
Confirm, cancel, or check existing cleaning schedules.
Explains auto, edge, area, random, and twice cleaning modes.
Details scrubbing mode with water intensity and gyro mode.
Instructions for cleaning side brushes, dust tank, filters, sensors, wheels, terminals, and main brush kit.
Provides a table of error codes, their causes, solutions, and audible alerts.
Details device model, product reference, voltage range, and frequency bands.
Follow EU directive for separate collection and recycling; contact local authorities for disposal.
2-year warranty for defects, excludes misuse; contact support for issues.
To Next Page