EasyManua.ls Logo

cecotec CONGA 1590 - Safety Instructions; General Safety and Usage Guidelines; Appliance Placement and Usage Restrictions; Pre-Operation Floor Check

cecotec CONGA 1590
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance.
Keep this instruction manual for future reference or new users.
This product must be used in accordance with the directions
in this instruction manual. Cecotec cannot be held liable or
responsible for any damages or injuries caused by improper
use.
Make sure that the mains voltage matches the voltage stated
on the rating label of the appliance and that the outlet is
grounded.
This product can only be assembled or disassembled by qualied
personnel.
Do not touch wires, power supplies or power adapters with
wet hands.
Keep the robot away from clothing, curtains and any other
similar materials.
Do not sit or place heavy or sharp objects on top of the appliance.
Do not place the appliance close to heat sources, ammable
substances, wet surfaces or allow it to come into contact with
water or other liquids. Do not operate outdoors.
Do not use the charging base if it has a damaged cord or plug
or if it is not operating properly. Contact the ofcial Technical
Support Service of Cecotec.
Do not operate the device on tables, chairs or other high
surfaces where it could fall.
Do not operate the product in places where temperature is
below 0 ºC or above 40 ºC.
The appliance can only be operated with the supplied battery
and power adapter. The use of other components or accessories
could cause risk of re, electric shock or product damage.
Before operating the robot, please remove any object on the
oor such as clothing, papers, power cords or other items that

Table of Contents

Related product manuals