Need help?Do you have a question about the cecotec Conga 1090 Connected and is the answer not in the manual?
General| Brand | cecotec |
|---|---|
| Model | Conga 1090 Connected |
| Category | Vacuum Cleaner |
| Language | English |
Description of Back Home and Power/Operation buttons.
Wi-Fi and LED indicators for status and battery.
Anti-collision, free-fall sensors, driving and omnidirectional wheels.
Side brushes, main brush, filters.
Power switch, charging terminals, base, adapter.
Dust tank, wet & dry tank.
Device for manual operation and settings.
Mops and a specific cleaning brush accessory.
Strips used to delimit cleaning areas.
Charge indicator, holder, transmitter, terminals.
Overview of modes, settings, and cleaning options.
Positioning the charging base with required clearance.
Connecting the charging base to the electrical outlet.
Attaching the side brushes to the robot.
Turning on the robot's main power switch.
Placing the robot on the base for charging.
Activating, pausing, and restarting the cleaning cycle.
Commanding the robot to return to its charging station.
Switching the robot completely off.
Overview of Auto, Scrubbing, Spot, Edge, and Room modes.
Using the robot for vacuuming, mopping, and scrubbing.
Intense area cleaning and edge cleaning functions.
30-min room cycle and suction level adjustment.
Adjusting water levels and using boundary strips.
Setting up automated cleaning cycles and remote time.
Procedure for removing and emptying the dust container.
How to clean the robot's filter.
Wiping the sensors with a dry cloth.
Removing hair and debris from the main brush.
Cleaning and replacement recommendations for the HEPA filter.
Maintenance for mesh and sponge filters.
Cleaning and replacement advice for side brushes.
Details on the main brush design and function.
Cleaning robot sensors to prevent navigation errors.
Instructions for charging, storage, and replacing the battery.
To Next Page