cecotec CONGA 1099 User Manual

Robots aspiradores/ Robot vacuum cleaners
Manual de instrucciones
Instruction manual
Manuel d’instructions
Bedienungsanleitung
Manuale di istruzioni
Manual de instruções
Instructiehandleiding
Instrukcja obsługi
Návod k použití

cecotec CONGA 1099 Specifications

General

Brand	cecotec
Model	CONGA 1099
Category	Vacuum Cleaner
Language	English

Summary

Safety Instructions

Back-home button

Returns robot to charging base when pressed.

Light indicator

Shows status via lights (battery, charging, error).

Power/operation button

Turns robot on/off, starts/pauses cleaning.

Parts and Components

Power switch

Turns the robot on or off.

Battery

Powers the robot.

Charging base

Station for robot recharging.

Remote control

Allows manual operation.

Before Use

Operation

Start cleaning

Initiates the cleaning cycle.

Auto cleaning mode

Robot cleans the entire surface systematically.

Scrubbing mode

Activates the mopping function.

Cleaning schedule setup

Configures automated cleaning cycles.

Cleaning and Maintenance

Empty dust tank

Procedure for removing dust from the tank.

Clean robot filter

Instructions for cleaning the robot's filters.

Clean main brush

Removing debris from the main brush.

Battery care and replacement

Guidelines for battery maintenance and replacement.

Troubleshooting

Omnidirectional wheel error

Robot signal 1 beep; issue with the omnidirectional wheel.

Main brush error

Robot signal 4 beeps; issue with the main brush.

Bumper error

Robot signal 2 beeps (blinking red); bumper sensor issue.

Cannot return to charging base

Robot signal red light 4 beeps; unable to dock.

Technical Specifications

Disposal of Old Electrical Appliances

Technical Support Service and Warranty